| Customization: | Available |
|---|---|
| Type: | Oxygen |
| Function: | Breath Therapy |
Suppliers with verified business licenses
Advantages:
>Compared with the traditional oxygen therapy, the optimum humidity oxygen supply can be controlled.
>Easy to use and tolerate, and supply flow and oxygen concentration without any influence.
>When the patient was removed or changed, the treatment was variable and continuous.
>The interface is smaller and does not require a variety of devices and treatment interface switching.promote oxygenation, reduce WOB.
>Improve airway mucosal clearance, more comfortable.
>Reduce the dead space of the pharynx and provide low level positive pressure.
>Get the same effect as low level CPAP.
Consist of:
Air-oxygen blender;
Chamber with heated;
Breathing circuit with heated wire;
Nasal prong.
Choose to match: medical air compressor.
Technical parameter:
>Air-oxygen blender (AD3000-SPA)
| »FiO2 |
21%~100% |
»alarm noise |
>57dB(A) |
|
»Folw |
0~18LPM | »pressure of air and oxygen | 0.3MPa~0.4MPa |
|
»gas-source interrupted |
audible alarm |
»measurement of main machine |
6.8*6.8*7.5cm |
| »pressure difference | Pressure difference more than 0.1MPa, audible alarm | »weight | About 1.6kg |
| »alarm time | > 60s |
»certificate |
EN ISO 13485 |
>PN-2000FB humidifier
|
»temperature |
Mode with Heated wire: 25ºC~39ºC |
»Max-temp of heating appliance |
<85ºC |
| Mode without heated wire: 23ºC~37ºC | »thermal cutoff of heating plate | 120±5ºC | |
|
»maximum water capacity |
230mL | »operating ambient temperature |
18ºC~26ºC |
| »working pressure | ≤2kPa | »display window flashing | patient distal temperature>40ºC |
| »flow | 180L/min | »H | patient distal temperature≥50ºC |
| »drop of pressure | <300Pa | »L | patient distal temperature≤10ºC |
| »power supply | 220VAC 50Hz | »ER2 | heating plate sensor failure or off |
| »power consumption | 150W | »ER3 | heating plate sensor failure or off |
| »volume | 135mm*145mm*155mm | »weight |
3.2kg |
){kind=link}