PP Non-Woven and Non-Woven Fabric Extrusion Lamination and Compounding Machine

• Customization: Available
• Classification: Non Woven Fabric Laminating
• Application: Particle Board, Aluminium Plate, Packaging Paper, Film Material
• Model NO.: BT-JDLM1300/90
• Automatic Grade: Automatic
• Membrane Material: LDPE.LLDPE
• Plastic Film Mulching Modes: Hot Laminating
• Performance: Waterproof
• Transport Package: Wooden Packing
• Specification: 7400*7000*3200MM
• Trademark: CDHK
• Origin: China
• HS Code: 8449009000
• Production Capacity: 100set/Month

Product Description

Product Description:

The laminating machine use Grade material LDPE, LLDPE, PP and so on as raw materials, which is specifically designed for online single-sided laminating of non-woven fabrics, woven bags and other products. In addition, it can also be used for paper base products.

 

Model	BT-JDLM1300/80
Screw diameter	φ90 mm
Length diameter ratio of screw	33:1
Width of finished product	600-1500MM
Film thickness	0.01-0.10MM
Mechanical design line speed	120M/MIN
Maximum extrusion capacity	180KG/H
Main motor power	37KW
Total power	98KW
Main unwinding diameter	≤φ1200 MM
Winding diameter	≤φ1200 MM
2nd unwinding diameter	≤φ500  MM
weight	7T
Dimensions	7400*7500*3200MM
Power source	380V/3P/4L/50HZ

Machine Highlight:

1. The machine can do stable coating at a high speed of 80-120M/Min.
2. Automatic Tension and EPC, so that the equipment has a higher coating precision. Then will reduce Labor cost.
3. Special Custermized Options, allow clients to modify what is needed. such as adding the return racks so that double-sided coating can be realized only with a single die, meanwhile the thickness of the double-sided coating can be consistent.

Equipment production principle:

The raw material of plastic pellets is heated, plasticized and extruded by the extruder. Pressurized and plasticized by static mixer, extruded by T-die head, internal plugging die head adjusts the coating width without stopping the machine, and does not change the uniformity of the discharge thickness

The main feeder feeds, corona, enters the laminating machine, laminating and cooling.

The winding machine is equipped with automatic tension control, and the pressure is controlled by precision pressure regulating valves at both ends of the air expansion shaft to ensure stable winding. Under normal circumstances, the winder changes the rolls at the same time after the material is changed to ensure that one joint has one roll of film.